I do a good quantity of off-roading in our Jeep, however I normally don’t convey bikes alongside once I do. One of many causes is that I hate watching the bike get bounced round on the rack in my rearview mirror. With different hitch-mounted racks, that’s what I’d see again there: the bike mounted to the rack, floppin’ all over. It may be exhausting to observe.
However, my 1UP USA Tremendous Obligation Double hitch rack is constructed for extreme off-roading. And when my Tremendous Obligation is mixed with the 1UP USA‘s Wheel Savers (now in XL measurement for MTBs) and Wheel Chocks, the shakey shenanigans are eradicated.
The 1UP USA Wheel Savers and Chocks aren’t only for automobiles that go off-roading. These equipment work nice to stabilize the bike on the rack, maintaining any pointless motion at bay. They usually work very effectively, particularly when working collectively.
1UP Wheel Chocks


Retail: $110 (each customary measurement and fats tire measurement)
Customary Dimension will match tires as much as 3″ broad, and the Fats tire Dimension will match tires from 3″ as much as 5″ broad.
The Wheel Chocks are nice at stopping that annoying entrance wheel sway that the majority “tray-type” hitch-mounted bike racks undergo from. That sway doesn’t really do any hurt to the bike or the wheel (so long as the uprights are tight), however man, it’s annoying. The Wheel Chock eliminates that sway, and makes the mounted bike extra secure on tough roads.






The Chocks are constituted of machined aluminum and are anodized black and purple. They arrive with the ratchet rail and all the mounting {hardware}. They’re very effectively made, and I’m assured that they are going to final for a really very long time.
As soon as put in, they’re simply detachable as effectively, with the ratchet rail staying on the rack tray. I hold one on my rack on a regular basis. However, doing so does threat the possibility of somebody taking it when you are parked. They slide on a notched rail that sits on the middle of the tray.




After you get your bike on the rack and comfortable the load arms down, you may set up the Wheel Chock. When attaching or sliding the Wheel Chock onto the notched rail, you’ll hear a nice ratcheting sound when pushing the Chock on from the within of the rack, with the “Y” dealing with in the direction of the bike’s tire.




When you will have it comfortable up in opposition to your tire, you tighten the large aluminum knob down onto the rail. Then, tighten down the black security collar to maintain it from unintentionally releasing. That’s it; you’re good to go, realizing that your mounted bike shall be secure, safe, and just about movement-free.
1UP Wheel Saver


Retail: $18 (customary measurement), $26 (XL measurement)
These lil’ wheel helpers are good to have round and are a pleasantly helpful addition to the rack. These are constituted of nylon and appear to be made to resist some abuse.






The Customary measurement is suitable with the next 1UP USA racks: Fast Rack, Heavy Obligation, and the Tremendous Obligation (examined). The XL Dimension is suitable with Fast Rack, Heavy Obligation, and the Tremendous Obligation, plus the Equip’D. 1UP additionally says that one per bike is enough. I’ve been utilizing two per bike, and it appears to work nice that method.




I’ve used each the Customary and XL measurement Wheel Savers quite a few occasions. The Customary measurement suits on tires as much as 1.7″ (44mm). The Teravail Cannonball tires that I run on my gravel bike are 47mm, and the Customary measurement suits tightly, however does match. The XL says it may match street, gravel, and MTB tires (as much as 2.6″) examined. Each sizes have a middle part that’s designed to suit smaller street tires, whereas the XL model has a second standoff for gravel tires, whereas MTB tires replenish the entire tray.


The Wheel saver will increase the contact patch for the rack’s load arm so as to add stability to the entrance wheel whereas providing an added degree of safety for high-end wheels.


A superb use for these is in case you have your rack excessive the place there’s numerous wind drive, like the highest of a automotive or excessive up on the again of an journey van. Or when the bike/rack goes by added stress, like spirited driving or going off-road.
In Conclusion
I’ve used each the Wheel Saver and the Wheel Chock continuous since I’ve gotten them. They each work effectively individually and really effectively when working collectively. They work exceptionally effectively when taking a street that could be rather less pleasant. I used them whereas performing some mild off-roading, and the bike stayed very nonetheless. The one draw back is that they’re not included with a brand new rack. Including each equipment will rapidly rack up the worth tag on your 1UP setup.


Thankfully, each of the merchandise are made very effectively and undoubtedly as much as the 1UP customary of producing. I count on them each to final a very long time. They’re a welcome addition to my rack setup, and I don’t wish to use the rack with out them.


When you’ve got one of many above-listed racks and wish to stabilize your steed higher, I’d extremely advocate these additions. Our bikes aren’t getting any cheaper, and it’s definitely worth the funding to maintain them as secure as potential from injury whereas transporting them.
1UP-USA.com