Is Manitou attempting to reinvent the mountain bike once more, greater than 30 years later with this FS II Future MTB mission?
Actually no. Positive, Manitou was one of many pioneers of full-suspension mountain bikes again within the early 90s. However they’re absolutely conscious that suspension design has superior far past merely strapping a second suspension fork to the again of an any body to get rear wheel journey. But that doesn’t imply that it wouldn’t be enjoyable to see what a extra fashionable adaptation of their first full-suspension mountain bike would appear to be up to date with some rather more fashionable tech…
Manitou FS II mission: Updating a Mountain Bike Legend
So, Manitou’s Hayes Bicycle Group father or mother firm determined to achieve out to Swiss gravity bike builders Gamux to see what sort of fashionable full-suspension path bike they may create, constructed round a suspension fork managing rear wheel journey like within the early days of mountain bike evolution.
Manitou figured they may work with a short-travel XC youngsters’ bike fork within the again, a mid-travel path bike fork up entrance, a Pinon gear field transmission on the backside bracket, after which let Gamux create one in every of their wild machined aluminum frames to make all of it work, with bonded in carbon constructions to modulate body stiffness as wanted!
The inspiration for all this silliness – and a quick historical past lesson for these too younger to recollect – was this early Manitou FS bike from the Nineties. Most likely the primary suspension mountain bike fork was created by Doug Bradbury underneath the Manitou title in 1990. Only a 12 months later, Bradbury had strapped a second fork onto the again to create a softail mountain bike. All managed by elastomers.
Again when 26″ and rim V-brakes have been the one factor going, and 3x drivetrains have been nonetheless the fad, Manitou was fairly superior with their unique FS providing already in 1993. It was an easier time.
So, Manitou and Gamux set to work on making a brand new model of the FS.
After which as soon as that they had it, to take the brand new Manitou FS II mission bike to the following stage, they sought out Gee Milner for a Dream Construct…
Manitou FS II future path bike prototype Dream Construct
“In an effort to have a good time not solely the origins of the model but additionally an innovation that modified the face of a whole sport, Manitou has partnered with Gamux, Pinion, Gates, Schwalbe, Hayes, ProTaper and Reynolds to create a ahead pondering, fashionable twist on the unique Manitou FS bike.
The thought was that whereas the nostalgic motives for recreating such a motorbike definitely maintain some worth, analyzing the previous may also be a conduit to constructing a greater future. Using classes realized from such a protracted and storied historical past with the identical ardour and want to innovate ensures that the way forward for MTB is each bit as thrilling because the wild experience that has introduced us to current day.
The Manitou FS II mission got down to incorporate probably the most superior elements and options of tomorrow on a platform that has roots within the iconic design that kicked off the revolution of the total suspension mountain bike.”
– Hayes Efficiency Techniques
Why construct it within the first place?
Now Manitou has assured us that their FS II mission bike isn’t actually meant to shake up full-suspension mountain bike design once more. Trendy suspension is rather more nuanced than a single pivot with a semi-stock fork dropped in.
And in actuality, with the larger 29″ wheels we experience right now, mixed with the decrease sloping toptubes to get sufficient standover top, I get the sensation that this isn’t precisely the smoothest strategy to actuate a few sliding fork stanchions with out one thing else to supply stability & stiffness, side-to-side stability, and even to manage kinematics in a extra manageable approach.
A fork at each ends
However I’m certain it was a enjoyable mission. And Manitou says the Gamux crew has really ridden the FS II a bit, and says it rides effectively sufficient. So, a minimum of it’s a bit greater than a present bike.
The guts of the entire mission is that this Manitou Machete JUnit Professional fork. It apparently began out identical to the identical fork that’s on my child’s 24″ hardtail. Besides, Manitou & Gamux chopped the steerer tube off and CNC-machined a totally new set of lowers and a brand new yoke to interface with the body. Additionally they created an all-new slimmer arch form, extra paying homage to that unique FS from 1993.
They usually gave it a customized tune and decreased the journey down to only 80mm to supply the finished bike with 125mm of single-pivot rear wheel journey – paired to 130/140mm up entrance.
After which, they gave the idea bike a Pinion gear field and Gates belt drive to yield a decrease middle of gravity for “higher dealing with, protected gearing, and important reductions in unsprung weight.“
Geometry-wise, Gamux says they constructed it to the specs they might need for a shred-capable downcountry path bike. So it will get a 66° headtube angle, a steep seat angle, comparatively lengthy 450mm chainstays to suit 29×2.4″ tires, and a 460mm lengthy body Attain.
Tech particulars by Gamux
Identical to the rear fork was closely modified by Gamux, additionally they machined your entire remainder of the FS II prototype body of their workshop in Switzerland.
Whereas at first look it regarded like there have been a number of spherical tubes welded along with some extra advanced tube shapes, the entire body is definitely CNC-machined from 7075-T651 aluminum in simply two elements.
Probably the most dramatic-looking is the 1-piece chainstays swingarm with a hollowed-out truss design that’s not too dissimilar to Gamux’s present manufacturing belt-drive Sego gearbox DH race bike… and even their very own still-in-development prototype path bikes.
The principle triangle is usually made up with hollowed-out field part tubes – in-filled with bonded-in carbon tubes. Gamux explains that they developed these “Bonded Carbon Components” with their World Cup DH race staff with a purpose to modulate body stiffness and tune the flex of the body individually for every rider.
The Manitou FS II mission body does get extra typical spherical tube shapes on the headtube and seattube – the place the body meets the tapered steerer tube of its fork and the seatpost.
It seems to be just like the outsized headtube can accommodate an angle alter headset in the event that they really feel the necessity to tweak the bike’s dealing with. However there’s actually not a lot room in that stubby seatpost to slot in a dropper publish. Though, possibly you can get away with a brief wi-fi dropper for extra rideability?
The Manitou staff describe building of the bike as “considerably price prohibitive” if anybody thought that they had intentions of creating it a viable product you would possibly really be capable to purchase.
Giving the mission bike a considerably reasonable construct
When you aren’t going to seek out this Manitou FS II prototype exhibiting up on the ground of your native bike store anytime quickly, there nonetheless are a variety of extra reasonable elements that make up the whole bike construct. It’s a Dream Construct, so there’s plenty of fancy package right here. But it surely’s principally fairly attainable bits from the Hayes Bicycle household of manufacturers.
Up entrance, the important thing spec is the Manitou Mattoc Professional fork. Actually one of many lightest, stiffest, and most versatile path bike forks, the thousand-dollar 29er Mattoc options 34mm stanchions and might provide journey anyplace from 110-150mm, with simple adjustability in 1cm increments.
Manitou fitted their prototype FS II mission bike with a Gates CDX belt-drive pulling a Pinion C1.12 gearbox – fittingly in anodized purple to match the particular version Purple Hayes (Haze) brakes.
Apart from Purple Hayes Dominion A4 brakes, there’s additionally a pleasant shiny full silver ProTaper A25 alloy bar and ATAC stem for extra old-school fashion.
After all, there’s loads extra shiny purple graphics, and a set of carbon Reynolds Blacklable 309 Enduro wheels to complete off the dream construct.
“As we replicate on the previous, we not solely see the place we’ve come from but additionally catch a glimpse of the way forward for mountain biking. From the Manitou rear-facing arch to the requirements Hayes set for brakes, and the near-universal adoption of full suspension, right now’s riders—whether or not in XC, DH, or something in between—are having fun with a greater expertise within the saddle, fingers down. They experience on the expertise of tomorrow, constructed upon classes from the previous for an unbelievable current.”
– Hayes Efficiency Techniques
ManitouMTB.com
